- Order number: 442000301
| V10 Zoom2–20x | CT glassbright, low stray light | A4Nfine hunting reticle | Manual illuminated dotdirect control | Parallax15 m to infinity |
|
NXT V10 · 2–20×50 · A4N · Manual
Compact Reach for Twilight and Long DistancesThe DDoptics NXT V10 2–20×50 combines tenfold zoom with a body just 318,69 mm long. From a clear overview at 2x to precise detail at 20x, it remains versatile for stalking, high-seat hunting and longer hunting distances. The bright 50-mm objective, CT glass and low stray light deliver a high-contrast image. The fine A4N reticle and manually controlled fibre-optic dot support clear, controlled target acquisition. The hunter switches the dot on and off and sets the brightness directly. |
![]() |
| 18,5–1,8 mField of view at 100 m | 680 gWeight | 318,69 mmOverall length | 30 mmMain tube |
![]() |
Super-Short Design for Thermal Clip-OnsAt just 318,69 mm long, the scope leaves valuable space on the rifle for a thermal clip-on. Its short design avoids unnecessary overall length and helps maintain balanced handling. Parallax adjustment allows clear focusing of the clip-on image as magnification increases. The NXT V10 thus combines a compact clip-on setup with the reach of a full-featured 2–20×50. |
A4N Reticle and Manual Fibre-Optic DotThe fine A4N reticle sits in the second focal plane, retaining its apparent size as you zoom. Its finer bars leave game and the aiming point largely unobstructed. The hunter switches the fibre-optic dot on and off and sets the brightness directly. This keeps operation fully under the hunter's control, while the fine A4N reticle leaves targets and game largely unobstructed. |
![]() |
![]() |
Precision Near and Far
Parallax Adjustment from 15 Metres and Internal ZeroStopParallax adjustment from 15 metres to infinity enables precise focusing and a parallax-free sight picture, especially important at 20x magnification and when using a clip-on. The 0,1-MRAD click adjustment provides distinct 1-cm increments at 100 metres. The internal ZeroStop gives a clearly defined stop when dialling back to zero. |
Mounting Advice for the 30-mm Main Tube
Tighten the mounting rings evenly and follow the mount manufacturer's instructions. Tightening torque on the riflescope must not exceed 2,0 Nm.
Position the front ring as far forward as possible on a free cylindrical section of the main tube, leaving sufficient clearance from the turret block. This avoids stressing the tube around the parallax mechanism. Use additional adhesive only if suitable and in accordance with the mount manufacturer's instructions.
A Compact Clip-On Combination
Short Setup with a Thermal Clip-OnDespite its 20x maximum magnification, the compact scope leaves ample space for a clip-on. Parallax adjustment helps focus the display image precisely at close range and at higher magnification. |
Technical Specifications
| Magnification | 2–20x |
| Objective diameter | 50 mm |
| Field of view at 100 m | 18,5–1,8 m |
| Exit pupil | 11–2,5 mm |
| Dioptre adjustment | ±3 dpt |
| Main tube diameter | 30 mm |
| Parallax adjustment | 15 m to infinity |
| Reticle / focal plane | A4N / second focal plane |
| Illuminated dot | manually controlled fibre-optic dot |
| Click adjustment | 0,1 MRAD (1 cm at 100 m) |
| Adjustment range / ZeroStop | 42 MRAD / yes |
| Coating | CT glass (Clear Transmission) |
| Outside diameter: objective / eyepiece | 57 mm / 46 mm |
| Overall length / weight | 318,69 mm / 680 g |
| Article number / EAN | 442000301 / 4260436314294 |
Subject to technical changes and production-related variations.
NXT V10 Riflescope Comparison
Click a product image or model name to view that NXT V10. Scroll the table sideways on smaller screens.
| Feature | 1–10×28Manual |
1–10×28iFiber |
1,5–15×40Manual |
1,5–15×40iFiber |
2–20×50Manual |
2–20×50iFiber |
| Field of view at 100 m | 42,5–4,25 m | 42,5–4,25 m | 24–2,5 m | 24–2,5 m | 18,5–1,8 m | 18,5–1,8 m |
| Weight | 629 g | 629 g | 700 g | 700 g | 680 g | 680 g |
| Main tube | 34 mm | 34 mm | 30 mm | 30 mm | 30 mm | 30 mm |
| Parallax adjustment | 10 m–∞ | 10 m–∞ | 15 m–∞ | 15 m–∞ | 15 m–∞ | 15 m–∞ |
| Reticle | Fine Cross | Fine Cross | A4D | A4D | A4N | A4N |
| Illuminated dot | manual | iFiber automatic | manual | iFiber automatic | manual | iFiber automatic |
| Overall length | 277 mm | 277 mm | 285,6 mm | 285,6 mm | 318,7 mm | 318,7 mm |
Recommended Optics Care
|
|
Best Price Service
If you have an offer that is more than 10% below the RRP from DDoptics, you will also receive this price from us.
![]() |
![]() |
![]() |
| 1. Produkt online gefunden | 2. DDoptics den Link schicken | 3. DEAL abschließen |
| mehr als 10 % unter DDoptics Preis | als Nachweis | gefundenen Preis auch von uns erhalten |
| Type of optics: | Rifle scope |
| Diopter adjustment: | +-3 |
| Weight in grams: | 680 |
| Enlargement: | 2-20 |
| Area of application: | Allround - Dämmerung |
| Generation: | NXT |
| Compensation: | Clear Transmission |
| Lens diameter lens in mm: | 50 |
| Exit pupil in mm: | 11-2.5 |
| Field of view at 100 m (in m): | 18.5-1,8 |
| Interpupillary distance in mm: | 11-2,5 |
| Reticle: | New reticle 4 |
| Luminescent point II: | Manual fiber |
| Reticle focal plane: | 2nd focal plane |
| Reticle adjustment / click: | 0.1 MRAD |
| Reticle adjustment (scaling): | double |
| Max. adjustment range: | 42 MRAD |
| Parallax compensation: | 15-unendlich |
| Surface: | fine black |
| Center tube diameter in mm: | 30 |
| ASV zero stop: | yes |
| Lens diameter outside in mm: | 57 |
| Eyepiece diameter in mm: | 46 |
| Total length in mm: | 318,69 |
Evaluations 2
Top Zielfernrohr
Zur Zeit das beste Preis/Leistungsverhältnis würde ich sagen.
Ein Zielfernrohr das deutlich mehr verdient als ein Vorsatzgerät davor zu klemmen. Ich nutze es überwiegend am Tage und bin sehr zufrieden ??????
DDoptics Zielfernrohr 2-20x50 – Erster Eindruck auf der „Jagd & Hund“
Heute hatte ich die Gelegenheit, auf der „Jagd & Hund“ in Dortmund das neue DDoptics Zielfernrohr 2-20x50 unter die Lupe zu nehmen. Nachdem ich bereits viel über das Modell 1,5-15x40 gehört und gelesen hatte – sowohl Lobeshymnen als auch kritische Stimmen zur optischen Qualität – war ich gespannt, mir selbst ein Bild von diesen Zielfernrohren zu machen.
Am Stand von DDoptics konnte ich beide Modelle unter den gegebenen Messe- und Hallenbedingungen testen. Besonders spannend war die Möglichkeit, das Zielfernrohr direkt in Kombination mit einem Wärmebildgerät zu erleben. Dabei zeigte sich schnell, dass die Konstruktion des 2-20x50 optimal für den Einsatz mit Vorsatztechnik geeignet ist. Das Handling, die Haptik und die Bildqualität haben mich in diesem Zusammenhang auf ganzer Linie überzeugt.
Bildqualität und Auflösung
Einer der Schwerpunkte meines Tests lag auf der Bildqualität, insbesondere bei verschiedenen Vergrößerungen. Schon auf den ersten Blick hat mich die Leistung des 2-20x50 positiv überrascht. In der höchsten Vergrößerung war die Bildschärfe bis zum Rand hin ausgezeichnet. Selbst feine Details blieben klar und gut erkennbar, ohne nennenswerte Verzerrungen.
Bei der kleinsten Vergrößerung (2-fach) konnte ich einen minimalen Schärfeabfall zum Rand hin feststellen. Allerdings muss man schon sehr genau hinschauen, um dies wahrzunehmen – im jagdlichen Einsatz dürfte dieser Aspekt kaum ins Gewicht fallen.
Erste Erfahrungen in der Dämmerung
Da ich ein Zielfernrohr speziell für den Einsatz in der Dämmerung suchte, habe ich das 2-20x50 noch am selben Abend im Revier getestet. Auch wenn meine Nacht-Tests bisher nicht umfangreich waren, konnte ich feststellen, dass die Lichtstärke des Zielfernrohrs hervorragend mit meinem 8x56-Fernglas mithält. Alles, was ich durch das Fernglas erkennen konnte, war auch durch das Zielfernrohr klar sichtbar und sicher ansprechbar.
Fazit
Der erste Eindruck des DDoptics Zielfernrohrs 2-20x50 ist durchweg positiv. Es überzeugt durch seine Vielseitigkeit, die hohe Bildqualität und die ausgezeichnete Eignung für die Kombination mit Vorsatzgeräten. Besonders beeindruckt hat mich die Leistung in der höchsten Vergrößerung. Selbst unter Messebedingungen war es möglich, die Bildqualität und Haptik des Zielfernrohrs gut zu beurteilen, auch wenn die Lichtverhältnisse in einer Halle nicht die realen jagdlichen Gegebenheiten widerspiegeln.
Ich werde das Zielfernrohr in den kommenden Wochen weiter testen und meine Erfahrungen vertiefen. Doch schon jetzt lässt sich sagen: Mir gefällt es.



1–10×28
1,5–15×40
1,5–15×40
2–20×50



