DDoptics rifle scope V6 2.5-15x50 NFX Gen3 | MRAD | A4N
- Order number: 442511134
DDoptics rifle scope V6 2.5-15x50 NFX special version with more field of view.
- V6 6x zoom
- reticle adjustment metal towers (no plastic)
- CT (clear transmission) glass (low dispersion)
- double scaling (double turn)
- Zero stop for ASV (zero stop)
- new design of magnification adjustment ring
- new Reticle 4 (A4N) with significantly finer bars
- hard, tactical 0.1 MRAD click detent (1 cm / click)
- adjustment range 184 clicks = 1.84 m at 100 m
- Accessories: 1x flip caps, cleaning cloth, DDoptics chip, targets, scopes instructions, ballistics set
New features
What's new about the latest generation rifle scopes?
At first glance, 3 changes immediately catch the eye:
1. The magnification adjustment ring has been noticeably changed and now provides more grip thanks to its coarser structure.
2. Reticle 4 has become significantly finer and creates more space in the middle.
3. The reticle adjustment is made of metal, is more clearly defined and has double turn and zero stop.
Robust adjustment mechanism for demanding use
The reticle adjustment turrets of the DDoptics Generation III scopes are made of a robust aluminum alloy and are free of all plastic parts. All aluminum parts are finished with the new non-glossy DDoptics "fine-black" anodizing coating. The adjustment mechanism was changed to the tactical version, i. H. it is not only very shockproof and completely waterproof, but also hard-running and thus protected against unintentional adjustment. This means that the reticle adjustment can also be used "open" in everyday hunting, i.e. without a screw cap, in order to be able to quickly adjust the reticle depending on the situation.
Reticle quick adjustment with zero stop
The number of click adjustments made can be read and adjusted accordingly on a double scale (double turn) on the height adjustment tower. After sighting in, the reticle adjustment can be "zeroed". The zero stop ring is then turned as far as it will go. The zero setting is then countered from below using the zero stop ring in order to achieve a stop at the zero position. Starting from the zero position, assuming knowledge of the load, different shooting distances can be preset using a marking system. The windage adjustment turret is labeled with two opposing scales. Starting from the setting zero, the reticle can be preset here depending on the wind direction and wind speed or any movement of the target.
New reticle 4 for minimal target coverage
Looking through the new generation III of the Nighteagle HDX rifle scopes, the observer immediately recognizes the practical design: The reticle in the 4N reticle is much finer and the originally somewhat thicker, outer bars are only half as thick and are significantly further apart. A great advantage, especially for the hunter in poor light conditions, as the target is only minimally covered and thus a lightning-fast and safe aim is optimally supported.
The 4N illuminated reticle is located in the eyepiece focal plane (2nd focal plane) and thus always remains the same size when changing magnification. No tools are required to adjust the reticle. The scope has a tactical 0.1 MRAD adjustment, i. H. the reticle is adjusted by 0.1 MRAD per click, i.e. by 1 cm at 100 m. For the user in Europe, this means simple use in the decimal system. The click adjustment works with absolute repeatability and can be reset to zero after zeroing (in case several loads are used).
Total adjustment range:
18.4 MRAD - 184 clicks - 1.84 m
Adjustment range / click at 100 m: 1 cm
Adjustment range / click at 200 m: 2 cm
Adjustment range / click at 300 m: 3 cm
Adjustment range / click at 600 m: 6 cm
- Do you have any questions concerning this product?
- Zielfernrohr Katalog
- Testbericht Geartester
- Further products by DDoptics
Best Price Service
If you have an offer that is more than 10% below the RRP from DDoptics, you will also receive this price from us.
 |
 |
 |
| 1. Produkt online gefunden | 2. DDoptics den Link schicken | 3. DEAL abschließen |
| mehr als 10 % unter DDoptics Preis | als Nachweis | gefundenen Preis auch von uns erhalten |
Robust adjustment mechanism for demanding use
The reticle adjustment turrets of the DDoptics Generation III scopes are made of a robust aluminum alloy and are free of all plastic parts. All aluminum parts are finished with the new non-glossy DDoptics "fine-black" anodizing coating. The adjustment mechanism was changed to the tactical version, i. H. it is not only very shockproof and completely waterproof, but also hard-running and thus protected against unintentional adjustment. This means that the reticle adjustment can also be used "open" in everyday hunting, i.e. without a screw cap, in order to be able to quickly adjust the reticle depending on the situation.
High-performance optics with improved contrast | CT glass
The DDoptics Generation III rifle scopes use high-performance CT glass (clear transmission) with our proven DDlucid coating. The advantage of the newly used type of glass is a significantly improved contrast behavior and the reduction of color fringes. However, the transmission to the Generation II rifle scopes could be increased slightly. Both generations are already at the upper limit of what is currently technically feasible.
Reticle quick adjustment with zero stop
The number of click adjustments made can be read and adjusted accordingly on a double scale (double turn) on the height adjustment tower. After sighting in, the reticle adjustment can be "zeroed", then the zero stop ring is turned as far as it will go. The zero setting is then countered from below using the zero stop ring in order to achieve a stop at the zero position. Starting from the zero position - assuming knowledge of the load - different shooting distances can be preset using a marking system. The windage adjustment turret is labeled with two opposing scales. Starting from the setting zero, the reticle can be preset here depending on the wind direction and wind speed or any movement of the target.
Light transmission with peak values
The fully coated optics, which do not allow any reflections, offer a brilliant image with outstanding edge sharpness properties. Because of the minimal proportion of stray light, even backlight is not a problem. The light transmission has peak values of 94.7% (day) and 93% (night), which allow reliable response until the last light of day.
New Reticle 4 for minimal target coverage
Looking through the new generation III rifle scope, the viewer immediately recognizes the practical design: The reticle in the 4N reticle is much finer and the slightly thicker, outer bars are only half as thick and are significantly further apart. This is a great advantage for the hunter, especially in poor light conditions, as the target is only minimally covered and thus a lightning-fast and safe aim is optimally supported. The reticle is in the eyepiece focal plane (2nd focal plane).
Finely dimmable light point
Thanks to the glass fiber technology, the illuminated dot not only becomes darker when dimmed more, but also finer. The illuminated dot is infinitely dimmable from backlight suitability to night vision device mode.
| Diopter adjustment: | -3 to +3 |
| Enlargement: | 2,5-15x |
| Weight in grams: | 712 |
| Type of optics: | Rifle scope |
| Twilight number: | 11,2-27,4 |
| Generation: | 3 |
| Compensation: | DDlucid |
| Lens diameter lens in mm: | 50 |
| Exit pupil in mm: | 11,6-3,4 |
| Field of view at 100 m (in m): | 15-2,5 |
| Interpupillary distance in mm: | 85-99 |
| Reticle: | New reticle 4 |
| Luminescent point II: | yes |
| Reticle focal plane: | 2nd focal plane |
| Reticle adjustment / click: | 0.1 MRAD |
| Reticle adjustment (scaling): | double |
| Max. adjustment range: | 18,4 MRAD |
| Parallax compensation: | 20-500-infinity |
| Surface: | fine black |
| Center tube diameter in mm: | 30 |
| ASV zero stop: | yes |
| Lens diameter outside in mm: | 58 |
| Eyepiece diameter in mm: | 43,5 |
| Total length in mm: | 376 |