DDoptics rifle scope Nighteagle V6 5-30x50 Gen3 | Tactical | MOA | duplex

• new CT glass (clear transmission)
• Zero stop (for zero stop)
• Double turn (double scaling)
• Horizontal adjustment with opposite Scales (wind left - right)
• very high resolution
• Accessories: 1x flip caps, cleaning cloth, DDoptics chip, targets, scopes instructions, ballistics set

Which red dot is installed in this rifle scope?

A manual fiber optic red dot is installed in our V6 5-30x50 rifle scope as standard.

Rifle scope with quick adjustment & zero stop

On the vertical adjustment, a double scale allows you to read and set the number of click adjustments made. After sighting in, the reticle adjustment can be "zeroed" by loosening the turret's safety catch with a coin or a screwdriver. The zero setting is then countered from below using the zero stop in order to achieve a stop at the zero position. Starting from the zero position, different shooting distances can be preset using a marking system.

Virtually indestructible scope

The nitrogen filling of the Nighteagle V6 5-30x50 Tactical rifle scope ensures water resistance (0.3 kg/cm²) and protects against internal fogging. The scope tube (diameter: 30 mm, length: 348 mm), which is made of duralumin (70%), brass (20%) and steel (10%), is also unaffected by rough use. The thickness of the outer wall is over 1 mm. The shock resistance is 1000 G or 6500 joules. The rifle scopes remain fully functional even at extreme temperatures (+80 °C to min. -20 °C).

The best red dot for backlight / twilight / night vision technology

The glass fiber red dot (also available in the automatic IFiber version for an additional charge) is kept so small that the target is only covered as little as possible. Thanks to the glass fiber technology, the illuminated dot of the rifle scope not only becomes darker when dimmed more, but also finer. The illuminated dot can be continuously dimmed by 100% until it can no longer be seen with the human eye. Below level 4, the illuminated dot can only be seen with a night vision device. On request, the illuminated dot can be adapted to the use of night vision devices such as Photonis commercial-grade XD4 or XR5 or Gen. 3. When the illuminated dot is switched off, the continuous reticle looks like a rifle scope without an illuminated unit and is not interrupted by an annoying, free-standing dot. When the illuminated dot is activated, neither annoying lights nor reflections within the optics disturb. Since the lighting unit is produced by hand, special customer requests can be taken into account individually.